UNS C76200 Nickel Silver 59-12 Copper Alloy Wire
UNS C76200 nickel silver is a copper-nickel alloy formulated for primary forming into wrought products.
Flat, Shaped and Round Wire
Applications
- Resistance Wire
- Hardware
- Optical components
- Photographic applications
- Screws, Rivets
- Base metal for plated jewelry
Description
UNS C76200 nickel silver is a copper-nickel alloy formulated for primary forming into wrought products. Nickel silvers are alloys that contain copper, nickel, and zinc (no silver). UNS C76200 should be manufactured by hot or cold working, and annealed if required, to produce a uniform wrought structure that meets the specified temper properties. The nickel silvers have moderately high strength and good corrosion resistance. Nickel silver has good aqueous corrosion resistance.
Chemistry Typical
UNS# COPPER NICKEL LEAD IRON ZINC OTHERS
C75200 63.0-66.5 16.5-19.5 0.05 max 0.25 max Balance 0.50 Mn max
C76200 57.0-61.0 11.0-13.5 0.09 max 0.25 max Balance 0.50 Mn max
C77000 53.5-56.5 16.5-19.5 0.05 max 0.25 max Balance 0.50 Mn max
* Contact Ulbrich Wire for request regarding the availability of other copper alloys.
* Contact Ulbrich Technical Department for limits for additional trace elements and impurity levels.
* Nickel values in includes cobalt.
* Copper values include silver.
* Copper plus sum of named elements 99.5% min.
Physical Properties
Typical Density: 0.310 - 0.316 lbs/in3, 8.58 - 8.75 g/cm3
Electrical Conductivity: (% IACS at 68° F 20°C, annealed): 5.5 - 9%
Thermal Conductivity: BTU-in/hr-ft2-° F
At 68° F: 17 - 24
Mean Coefficient of Thermal Expansion: µin/in-°F
68 - 572 °F: 9 - 9.3
Modulus of Elasticity: KSI (MPa)
18 x 103 in tension
Melting Range: 1981 °F (1083 °C)
Forms
- Nickel Silver Copper Profile Shaped Wire
- Nickel Silver Copper Round Wire
- Nickel Silver Copper Flat Wire
- Nickel Silver Copper Square Wire
Mechanical Properties at Room Temperature
Properties: Annealed Typical
Ultimate Tensile Strength: 53 KSI min (365 MPa min)
Yield Strength: 25 KSI min (172 MPa min)
Elongation: 35% min
Properties: Tempered
These alloys can be cold worked to various tempers.
*Actual physical and mechanical properties are alloy dependent. Contact Ulbrich Technical Service for alloy specific properties.
Additional Properties
Corrosion Resistance
Contact Ulbrich Wire for specific information.
Wire Finishes
XC - Extra clean. Annealed or annealed and cold rolled. Contact Ulbrich Wire with special finish requests.
Heat Treatment
These alloys are non hardenable by heat treatment.
Welding
Contact Ulbrich Wire for specific information.
Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels & Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the 'applications' noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.
Get a Quote
Thanks for your interest in Ulbrich! Whether you're developing a new product or ramping up production, we'll be happy to learn more about your specific needs. Please fill out the form below, and we will promptly get back to you with a quote or, if needed, a request for more information.