UNS C19500 Wire
These alloys exhibit good to excellent corrosion resistance with medium to high thermal and electrical conductivity.
Flat, Shaped and Round Wire
Applications
Electrical/electronic applications where higher strength levels are required while maintaining good electrical conductivity: Heating elements; Cable shielding; Spring; Electrical contact; Semiconductor lead frames; Spring pins; and Wave washers.
Description
These alloys exhibit good to excellent corrosion resistance with medium to high thermal and electrical conductivity. They offer higher strength levels than pure copper alloys and some are heat treatable.
Chemistry Typical
UNS NUMBER COPPER* IRON NAMED BERYLLIUM OTHER
C16200 Balance 0.02 max 0.7-1.2 Cd n/a n/a
C17200 Balance n/a n/a 1.80-2.0 0.20 Al, 0.20 Co, 0.20 Si
C17500 Balance 0.10 max 2.4-2.7 C0 0.4-0.7 0.20 Al, 0.2 Si
C18200 Balance 0.10 max 0.6 0 1.5 Cr n/a 0.05 Pb, 0.10 Si
C19400 97.0 min 2.1 - 2.6 0.015-0.15 P n/a 0.05 - 0.20 Zn,
0.03 Pb
C19500 96.0 min 1.0 - 2.0 0.010-1.0 Sn n/a 0.01 - 0.35 P, 0.03- 1.3 Co
C19700 Balance 0.30 - 1.2 0.20-0.40 P n/a 0.20 Sn, 0.20 Si, 0.05 Sb
* Contact Ulbrich Wire for request regarding the availability of other copper alloys. * Contact Ulbrich Technical Department for limits for additional trace elements and impurity levels. * Copper Values include Silver.
Physical Properties
Typical Density: 0.322 lbs/in3, 8.92 g/cm3
Electrical Conductivity: (% IACS at 68°F 20°C, annealed): 20-90%
Mean Coefficient of Thermal Expansion: µin/in-°F (µm/m-°C)
68 - 572 °F: 9.6 - 9.7
Thermal Conductivity: BTU-in/hr-ft2-°F
68 °F: 60 - 185
Modulus of Elasticity: KSI
17 - 18.5 x 103 in tension
Forms
Profile, Round, Flat, Square
Mechanical Properties at Room Temperature
Properties: Annealed Typical
Ultimate Tensile Strength: 35 - 85 KSI (241 - 586 MPa)
Yield Strength: 11 - 25 KSI (71 - 172 MPa)
Elongation: 20% min
Properties: Tempered
High performance copper alloys can be cold worked to various tempers.
* Actual physical and mechanical properties are alloy dependent. Contact Ulbrich Technical Service for alloy specific properties.
Additional Properties
Corrosion Resistance
Contact Ulbrich Wire for specific information.
Wire Finishes
XC - Extra clean. Annealed or annealed and cold rolled. Contact Ulbrich Wire with special finish requests.
Heat Treatment
Alloys 162, 172 and 175 are hardenable by heat treatment.
Welding
Contact Ulbrich Wire for specific information.
Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels & Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the 'applications' noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.
Get a Quote
Thanks for your interest in Ulbrich! Whether you're developing a new product or ramping up production, we'll be happy to learn more about your specific needs. Please fill out the form below, and we will promptly get back to you with a quote or, if needed, a request for more information.